开关与凸轮控制器领域的全球标杆企业 Kraus & Naimer 每日开关产量达 8000 个，产品范围涵盖从小型控制开关到用于发电厂的大型设备。令人惊叹的是，即便是在工业以太网技术领域以速度著称的 EtherCAT，在这里也以“增强模式”运行。
更多关于此视频的信息
EtherCAT
倍福基于以太网现场总线系统的 EtherCAT（Ethernet for Control Automation Technology）技术具有性能优异、拓扑结构灵活和系统配置简单等特点。
TwinCAT HMI
TwinCAT 现在将人机界面直接集成在人们所熟悉的 Visual Studio® 环境中。它不需要编程，因为 TwinCAT HMI 图形编辑器可以轻松地完成配置工作。
EL5001 | EtherCAT Terminal, 1-channel encoder interface, SSI
The EL5001 EtherCAT Terminal is an SSI master and enables the direct connection of an absolute encoder with SSI (synchronous serial interface). Both singleturn and multiturn encoders are supported. The 24 V supply of the encoder can be provided directly via the terminal connection points. The EL9505 power supply unit terminal can be used for an optional 5 V encoder operating voltage.
EL2202 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate
The EL2202/EL2202-0100 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. This terminal benefits from very small output delay and is therefore suitable for signals requiring particularly fast output. The EtherCAT Terminal has a push-pull output that can be actively switched to 24 V, 0 V or high-impedance. The EL2202-0100 contains two channels. LEDs indicate the signal state of each channel.
EL1018 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 10 µs
The EL1018 digital input terminal acquires the binary 24 V control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Each EtherCAT Terminal has eight channels that indicate their signal state via light emitting diodes.
