Servomotor without fan, OCT
AM8111-wFyz | Servomotor 0.20 Nm (M0), F1 (40 mm)
Servomotor without fan, resolver
Servomotor without fan, OCT
AM8111-wFyz | Servomotor 0.20 Nm (M0), F1 (40 mm)
Servomotor without fan, resolver
The AM8111 low-voltage servomotor is suitable for highly dynamic drive solutions in compact design in the voltage range of < 50 V DC. The standstill torque of the motor depends on the winding and is in the range of < 1.5 Nm. It is available with the OCT feedback system (absolute encoder). The low-voltage servomotor with flange code F1 (40 mm) and motor length 1 has a shaft diameter b = 8 h7 and a free shaft end of d = 25 mm.
Product status:
regular delivery
Product information
| Data for 48 V DC | AM8111-wFyz |
|---|---|
| Motor type | permanent magnet-excited three-phase synchronous motor |
| Nominal voltage | 24…48 V DC |
| Standstill torque | 0.20 Nm |
| Rated torque | 0.19 Nm |
| Peak torque | 0.68 Nm |
| Rated speed | 4000 min-1 |
| Rated power | 0.08 kW |
| Standstill current | 2.85 A |
| Peak current | 8.6 A |
| Torque constant | 0.07 Nm/A |
| Rotor moment of inertia | 0.029 kgcm² |
| Motor feedback | resolver, single-turn absolute encoder
OCT, 18 bit, single-turn or multi-turn absolute encoder, electronic nameplate OCT, 24 bit, SIL 2-capable, single-turn or multi-turn absolute encoder, electronic nameplate |
| Cooling | convection |
| Connection technology | itec® plug |
| Ambient temperature (operation) | 5…40°C |
| Approvals/markings | CE, cURus |
All electric quantities are RMS values.
| Housing data | AM811x | Flange code F1 |
|---|---|
| Protection rating | IP54 |
| Design form | flange-mounted according to IM B5, IM V1, IM V3 |
| Material | aluminum |
| Coating/surface | acrylic powder-coated, dark gray, similar to RAL7016 |
| Dimensions | AM8111-wFyz |
|---|---|
| a | 30 h7 |
| b | 8 h7 |
| d | 25 mm |
| l | 46 mm |
| r | 40 mm |
| k (without brake) | 97 mm |
| k (with brake) | 129 mm |
| Order reference
AM8111-wFyz | |
|---|---|
| w = 0 | smooth shaft |
| w = 1 | shaft with groove and feather key according to DIN 6885 |
| x | winding code |
| y = 0 | 2-cable standard: feedback resolver |
| y = 1 | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, single-turn, absolute position within one revolution, 18 bit resolution |
| y = 2 | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, multi-turn, absolute position within 4096 revolutions, 18 bit resolution |
| y = GPreferred type | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, single-turn, absolute position within one revolution, resolution 24 bit, SIL 2-capable (Mandatory for TwinSAFE Safe Motion functions at ELM72xx-9018) |
| y = HPreferred type | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, multi-turn, absolute position within 4096 revolutions, resolution 24 bit, SIL 2-capable (Mandatory for TwinSAFE Safe Motion functions at ELM72xx-9018) |
| z = 0 | without holding brake |
| z = 1 | with backlash-free permanent magnet holding brake |
| The options cannot be installed in the field. |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use