AMP8620-2005-0010 | Power supply module for AMP8000
AMP8620-2005-0010 | Power supply module for AMP8000
The illustrated product overview shows a selection of cabling options with control cabinet feedthroughs and extension cables for the distributed servo drive system AMP8000.
The AMP8620 module is directly connected to the mains supply, which minimizes the footprint and the cabling effort for the entire machine. It contains all required circuitry components, such as mains filters, rectifiers and charging circuits for the integrated DC link capacitors. Further distribution modules or decentralized AMP8000 Servo Drives can optionally be connected to the power supply module. It has two EtherCAT P outputs, through which either EtherCAT P modules can be supplied or else additional power supply modules can be connected that may be required for system expansion. The safe 24 V power supply unit integrated in the power supply module ensures that the logic power supply does not exceed the permissible level. The DC link capacitors integrated in the power supply module store the regenerative energy of the entire system and then make it available again for acceleration processes. This ensures the best-possible utilization of the energy supplied.
More on distributed drive technology.
Product status:
regular delivery
Product information
| Technical data | AMP8620-2005-0010 |
|---|---|
| Function | power supply module |
| Channels | 5 |
| EtherCAT P inputs | 1 x M8 |
| EtherCAT P outputs | 2 x M8 |
| Rated supply voltage | 1 x 120…240 V AC 3 x 200…480 V AC |
| DC link voltage | 155…848 V DC |
| DC link output current | ∑ max. 4/∑ max. 8 A DC (at single-phase feeding), ∑ max. 20 A DC |
| Continuous braking power | - |
| System bus | EtherCAT |
| Drive profile | CiA402 according to IEC 61800-7-201 (CoE) |
| Ambient temperature (operation) | 0…40°C |
| Approvals/markings | CE, cULus |
| Material compliance | AMP8620-2005-0010 |
|---|---|
| CAS No. | 7439-92-1 |
| REACH SVHC | Lead |
| REACH Annex XVII | compliant |
| REACH Annex XIV | compliant |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 6a: Lead in steel with a maximum mass fraction of 0.35% lead, 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors, 6c: Copper alloy with a mass fraction of up to 4% lead |
| China-RoHS | www.beckhoff.com/china-rohs-motion |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
| Housing data | AMP8620, AMP8805 |
|---|---|
| Protection rating | IP65 |
| Dimensions | AMP8620-2005-0010 |
|---|---|
| Height without mating connectors | 219 mm |
| Depth | 142 mm |
| Width | 294 mm |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use