BK5160 | CANopen K-bus Bus Coupler
fieldbus,
power
supply
power contacts
BK5160 | CANopen K-bus Bus Coupler
The BK5160 standard coupler is a CANopen slave that supports the KL, KS, and KM series Bus Terminals. It automatically detects baud rates of up to 1 Mbit/s. The node address can be specified easily and manually using two rotary selector switches. The BK5160 also has a USB-C interface so that the KS2000 software can be used to configure the bus terminals or to enable firmware updates.
The CAN connection is a 9-pin D-sub connector. A suitable ZS1052-3000 connector for field assembly with integrated terminating resistor is available for this D-sub connector.
Product status:
on request
Product information
| Technical data | BK5160 |
|---|---|
| Number of Bus Terminals | 64 (255 with K-bus extension) |
| Max. number of bytes fieldbus | 16 Tx/Rx PDOs |
| Number of PDOs (CANopen) | 16 Tx/Rx PDOs |
| Additional CANopen features | life, node guarding, emergency object, variable mapping, store/restore |
| Data transfer rates | automatic detection up to 1 Mbaud |
| Bus interface | D-sub 9-pin socket |
| Data transfer medium | screened, twisted copper cable, 2 x signal, 1 x ground (recommended) |
| Power supply | 24 V DC (-15%/+20%) |
| Interfaces | configuration interface |
| Diagnostics LED | 2 x power supply, 2 x K-bus, 2 x fieldbus |
| Current supply K-bus | 1750 mA |
| Operating modes | synchron, cyclic, event driven, polling |
| Weight | approx. 135 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE |
| Housing data | EK-49-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
| Dimensions (W x H x D) | 49 mm x 100 mm x 73 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use